1. Multiboot Software Download
2. Free Multiboot Software
3. Multiboot software, free download
4. Sardu Multiboot Software Download
5. Multiboot Usb

If you wish to download unmaintained previous releases then head over Github or sourceforge Sundar. 2018. multibootusb.org Theme by beautiful-jekyll. Multiboot software, free download - Balder Multiboot, Ranish Partition Manager, BootIt Bare Metal, and many more programs.

YUMI (Your Universal Multiboot Installer), is the successor to our MultibootISOs. It can be used to create a Multiboot Bootable USB Flash Drive containing multiple operating systems, antivirus utilities, disc cloning, diagnostic tools, and more. Contrary to MultiBootISOs which used grub to boot ISO files directly from USB, YUMI uses syslinux to boot extracted distributions stored on the USB device, and reverts to using grub to Boot Multiple ISO files from USB, if necessary.

Aside from a few distributions, all files are stored within the Multiboot folder, making for a nicely organized Portable Multiboot USB Drive that can still be used for other storage purposes.

YUMI was originally intended to be used to store and run various 'LIVE Linux' Operating Systems and tools from USB. Using YUMI to install Linux from USB to a Hard Drive works on many but not all distributions. (I'm working to address this). If you find a distribution where the install does not work, please let me know.

YUMI Multiboot Bootable USB Flash Drive Creation

YUMI works much like Universal USB Installer, except it can be used to add more than one distribution to run Live from your Thumb Drive. USB Bootable Distributions can also be uninstalled using the same tool!

YUMI Main Multiboot USB Boot Menu

Legacy YUMI Download and Changelog:

Multiboot Software Download

09/10/2019YUMI-2.0.6.8.exe: Update to support Ubuntu Budgie, Deepin Linux, and Slackel. Update Archlinux boot method and Knoppix link.

YUMI MD5: 3345D14F4FF04287D83909D783598C5C

The following YUMI UEFI version is a work in progress that utilize GRUB2 for both UEFI and BIOS booting. Please NOTE that it is not backwards compatible with standard YUMI. Supported distributions are limited, and your USB drive must be Fat32 formatted to support booting in UEFI mode. (Only BIOS mode will work with NTFS formatted drives).

YUMI UEFI Download and Changelog:

05/30/2019YUMI-UEFI-0.0.1.6.exe: Update to support newer Dr.Web, Kaspersky Rescue Disk, and OpenSuse Leap. Add support for BionicPup, MX Linux, and Emmabuntus.

YUMI UEFI MD5: 67C03CD41ADAEF03DD4E90DF6004B40E

Important YUMI UEFI info: You'll need to disable secure boot (if it's enabled). Drive must be Fat32 formatted if you want to UEFI boot.

Running YUMI from LINUX:WINE has previously worked for running YUMI from a Linux OS, with the exception of Fat32 Formatting the USB drive. See How To

IMPORTANT NOTES: Your USB drive must be Fat16/Fat32/NTFS formatted, otherwise Syslinux will fail and your drive will NOT Boot. NTFS may not work with every distribution but is required for storing files over 4GB. YUMI UEFI must use Fat32 format.

YUMI can be used to format your select USB drive, but be aware that all partitions on the selected drive will also be deleted. Ensure that you have made a backup of any information you want to keep before using YUMI on any drive.

Basic Essentials to create a MultiSystem Bootable USB Drive

• Fat32 or *NTFS Formatted USB Flash or USB Hard Drive
• PC that can boot from USB
• Windows Vista/7/8/10 or Linux/Mac OS with (WINE)
• YUMI-2.0.6.8.exe
• Your selection of ISO Files

Please inform me of unlisted 'FREE' Live Linux distributions or version revisions, and I will attempt to update YUMI to support them. Bootable Software developers who wish to have their 'PAID' software added, can send me a copy to try.

YUMI UEFI Changelog

05/30/19 Version 0.0.1.6: Update to support newer Dr.Web and Kaspersky Rescue Disk and OpenSuse Leap. Add support for BionicPup, MX Linux, and Emmabuntus.

04/28/19 Version 0.0.1.5: Quick fix to support newer Parted Magic 2019.

04/27/19 Version 0.0.1.4: Update to support Manjaro 18.04, System Rescue Cd 6.0.3. Added support for Raspberry Pi Desktop.

02/14/19 Version 0.0.1.3: Update to support Kodachi and Memtest86. Implement 7zip version 18.6. Fix broken Redo Backup homepage link. Add Anonymous Browsers section. Add Home, FAQ and Support links.

01/06/19 Version 0.0.1.2: Fix to remove duplicate Linux Distributions Menu entry. Edit Grub 2 config to set root by –label MULTIBOOT. Revert to set gfxmode=640×480 as auto still exhibits rendering issues on BIOS boot.

01/05/19 Version 0.0.1.1: Update to support Acronis True Image 2019. Make Memtest 86+ option only appear for BIOS boot. Change to set gfxmode=auto

12/27/18 Version 0.0.1.0: Fix case in configfile path (change from EFI/boot to EFI/BOOT) in boot/grub/grub.cfg. Update to use GRUB 2.03.

11/04/18 Version 0.0.0.9: Update to support newer Ubuntu and derivatives using initrd instead of initrd.lz,.gz, etc.

04/26/18 Version 0.0.0.8: Fix various broken links.

03/10/18 Version 0.0.0.7: Update to support UEFI 32 bit firmware. Update to support newer Debian Live, and Fedora Workstation Live.

12/10/17 Version 0.0.0.6: Update to support AEOMI Backupper. Fix broken Tails.

10/06/17 Version 0.0.0.5: Update to support newer Tails and Manjaro. Fix broken Debian, Lubuntu, and Xubuntu links. Replace empty spaces in copied ISO files with dashes to prevent paths from breaking.

01/19/17 Version 0.0.0.4: Fix to replace empty spaces in Distro filename with dashes. Update Get Drives function to ignore system and network drives. Correct some wording.

08/19/16 Version 0.0.0.3: Add support for Arch Bang, Skywave Linux, and Cyborg Linux.

07/28/16 Version 0.0.0.2: Fix entry for Slacko Puppy UEFI

06/28/16 Version 0.0.0.1: Initial Release.

Standard YUMI Changelog

09/09/19 Version 2.0.6.8: Update to support Ubuntu Budgie, Deepin Linux, and Slackel. Update Archlinux boot method and Knoppix link.

07/11/19 Version 2.0.6.7: Update to support OpenMandriva, Clear Linux, and Alpine Linux. Add support for newer Parrot OS, Fix Clonezilla entry to enable To RAM booting so that the USB stick can be moved to different machines once booted.

05/28/19 Version 2.0.6.6: Update to support newer versions of OpenSUSE Leap Live, Dr.Web, and AntiX. Add support for Emmabuntus and BionicPup.

04/27/19 Version 2.0.6.5: Fix to support System Rescue CD 6.0.3, and HD Sentinel

02/26/19 Version 2.0.6.4: Quick update to add support for newer System Rescue CD 6.0.2+

01/16/19 Version 2.0.6.3: Fix broken bootloader from version 2.0.6.2.

01/10/19 Version 2.0.6.2: Update Fedora boot method. Remove changing of generic.lst to $ISOFileName.lst as sometimes the filename becomes too long to detect. Consolidate generic.lst entries into basic.lst. Create syslinux.bin file to be used for chainloading.

12/02/18 Version 2.0.6.1a: Update to support newer Ubuntu and derivatives using initrd instead of initrd.lz,.gz, etc.

11/30/18 Version 2.0.6.1: Include ability to see which Disk the drive letter is on. Improve DiskWipe option – rescan before creating a new partition.

11/28/18 Version 2.0.6.0: Set Fat32 and NTFS Format options to format only the selected Volume Drive Letter. Include a new option to Wipe Entire Disk (including all attached Volumes/Partitions). The Wipe Entire Disk option can be used to Restore USB drives made bootable with DD, or to convert them back to use a single partition with a bootable MBR.

10/31/18 Version 2.0.5.9: Update to support Pearl Linux. Fix some broken links. Fix Solus entry.

07/20/18 Version 2.0.5.8: Update to support Norton Bootable Recovery Tool, Quick Save Live, Hiren's Boot CD PE, and newer CentOS 7 Live.

06/19/18 Version 2.0.5.7: Update to support Kodachi, and newer Kaspersky Rescue Disk.

05/06/18 Version 2.0.5.6: Update to support GeckoLinux and newer Porteus.

04/25/18 Version 2.0.5.5: Fix various broken links.

03/07/18 Version 2.0.5.4: Added initial support for KaOS, VyOS, Bluestar Linux, Raspberry Pi Desktop, and XenialPup. Medicat now extracts to the root folder until I find a fix for lost paths.

01/09/18 Version 2.0.5.3: Added support for Super Grub2 Disk, Trisquel, newer LXLE, and Medicat.

12/18/17 Version 2.0.5.2: Added support for MX Linux and Feren OS.

10/28/17 Version 2.0.5.1: Added support for Parrot, Vinux (for the blind and visually impaired), POP!_OS, and WifiWay 3.5.

09/26/17 Version 2.0.5.0: Added support for Antergos, PureOS, CentOS Installer, Ubuntu Mini (Netboot Installer), and recent Debian Live and Tails Images. Corrected broken Debian homepage link and Lubuntu, Xubuntu download links.

05/06/17 Version 2.0.4.9: Fixed recently broken Debian Live entry. Added option to set Windows to Go VHD file size.

05/01/17 Version 2.0.4.8: Update to support Neon, Finnix, Devuan, Vinari OS, and Ubuntu Budgie. Added compatibility test file.

04/19/17 Version 2.0.4.7: Update to support newer Manjaro and Archlinux. Address potential missing Config file errors when subsequently adding distributions.

03/27/17 Version 2.0.4.6: Quick fix to correct the double Distro list during step 2.

03/22/17 Version 2.0.4.5: Add ability to create larger than 4GB casper-rw persistent file if using NTFS format for Ubuntu and Linux Mint – (creates 4th partition table). Added casper-rw creation progress banner.

03/13/17 Version 2.0.4.4: Add filesystem type to drivelist. Include message box to notify of NTFS filesystem requirement for Windows to Go option.

03/03/17 Version 2.0.4.3: Add Windows to Go VHD option. Added more info for syslinux warning. Added Diskpart NTFS format option.

02/22/17 Version 2.0.4.2: Temporarily limit format option to removable media only.

02/16/17 Version 2.0.4.1: Quick fix to address broken format option.

02/12/17 Version 2.0.4.0: Temporarily add back Single Windows Vista/7/8/10 Installer option (which extracts all files from ISO to root). Add lock and dismount capability.

02/02/17 Version 2.0.3.9: Update to support OSFClone, newer WifiSlax, and NetRunner. Correct AntiX entry to use bdir=. Update to replace empty spaces in iso file with dashes. Correction to GRUB Partition 4 option.

01/30/17 Version 2.0.3.8: Quick Fix for singular and multiple Win PE builds.

01/28/17 Version 2.0.3.7: Update to support various Win PE builds. Modified distribution removal process. Corrected font size for Show All ISOs option.

01/14/17 Version 2.0.3.6: Update to support multiple Windows Vista/7/8/10 Installers. -wimboot option stores the extracted Multi Windows Installers in their own directory. -bootmgr option moves only bootmgr and bcd to root of drive. (note: -bootmgr option does require a Windows Vista or later host to run bcdedit).

12/27/16 Version 2.0.3.5: Fix to replace empty spaces in Distro filename with dashes. Add Windows PE (WIM) boot options (unfinished). Implement wimboot capabilities, Switch to newer Grub4Dos. Update labels.

12/22/16 Version 2.0.3.4: Quick fix to correct the double Distro list during step 2.

12/19/16 Version 2.0.3.3: Update Get Drives function to ignore system and network drives on subsequent YUMI installs. Corrected UI vesamenu paths.

12/12/16 Version 2.0.3.2: Update to support Solus. Reinclude show all drives option. Disable FSCTL lock, dismount, and unlock volume features until a better solution is found.

12/10/16 Version 2.0.3.1: Update Get Drives function to ignore system and network drives. Add filesystem and drive type to drive list. Add lock, dismount, and unlock features.

12/02/16 Version 2.0.3.0: Update to support ChaletOS and Bunsenlabs. Support newer Fedora Workstation Live and Zorin Core ISOs. Fix CentOS Link. Create a trk3 directory at the root of USB before copying files (necessary for Windows XP copyfiles).

10/03/16 Version 2.0.2.9: Switch back to 7-Zip 9.20.

09/14/16 Version 2.0.2.8: Fix menu entries for boot repair, and elementary OS. Upgrade to 7-Zip 16.02.

08/18/16 Version 2.0.2.7: Add support for Arch Bang, Skywave Linux, and Cyborg Linux.

07/07/16 Version 2.0.2.6: Add support for Android-x86. Fix broken Manjaro entry. Update credits and sources.

07/01/16 Version 2.0.2.5: Fix Eset, avira, and Dr.Web menu entries which became broken in build 2.0.2.4.

06/28/16 Version 2.0.2.4: Update to support Cub Linux. Fix broken WifiSlax entry. Use alternate method for old Ubuntu derivatives with conflicting syslinux gfxboot.

06/01/16 Version 2.0.2.3: Fixed bug: calculating remaining space on USB drive. Switch back to using vesamenu for sub-menu config files. Remove unused Prompt 0 from config. Re-enable Ubuntu gfxboot.

04/14/16 Version 2.0.2.2: Update to support Linux Kid X, Linux Lite, Subgraph OS, and Calculate Linux Desktop. Re-enable entry for Offline NT Password and Registry Editor.

04/06/16 Version 2.0.2.1: Update to support WattOS, update SLAX option, update links, disable feature to close all open explorer windows when format option is selected. Update Fat32Format.

12/28/15 Version 2.0.2.0: Add GRUB (partition 4) option. Update to support Xioapan, Windows 10, Bitdefender Rescue CD options. Update DBan option.

10/28/15 Version 2.0.1.9: Remove distributions that are no longer being developed. Fix broken links.

06/17/15 Version 2.0.1.8: Update to support newer GRML 2014-11, CentOS 7, Clonezilla 2.4.2-10, and Ultimate Edition 4.

05/14/15 Version 2.0.1.7: Update links.

03/18/15 Version 2.0.1.6: Add support for Tahrpup 6.0, Debian Live 7.8.0, and OpenSuSe 3.2.

01/20/15 Version 2.0.1.5: Fix broken 64bit option for Parted Magic entry.

01/15/15 Version 2.0.1.4: Update to support 2015_01_13 Parted Magic.

01/13/15 Version 2.0.1.3: Remove Acronis True Image entry (Use Try Unlisted ISO GRUB for Acronis). Updated links.

10/30/14 Version 2.0.1.2: Enable checkbox option to forcefully Show All ISO Files.

10/29/14 Version 2.0.1.1: Update to support Linpus Lite, minyMac, and ESET SysRescue Live. Fix AntiX boot issue.

09/19/14 Version 2.0.1.0: Switch to use Syslinux 6.0.3 to address ERR: Couldn't read the first sector issues.

09/11/14 Version 2.0.0.9: Add Dr.Web LiveDisk. Fix broken System Rescue CD, and HDT option. Update Ubuntu download options.

08/14/14 Version 2.0.0.8: Fix Windows Vista/7/8 and Hiren's options.

07/31/14 Version 2.0.0.7: Switch to use Syslinux version 6.02.

Free Multiboot Software

07/29/14 Version 2.0.0.6: Update to support Peach OSI.

05/29/14 Version 2.0.0.5: Update Ubuntu, CentOS, and Debian Download Links. Remove Backtrack – superseded by Kali.

04/29/14 Version 2.0.0.4: Update to support CAINE and Puppy Arcade.

04/17/14 Version 2.0.0.3: Update to support Tails 0.23 and Rescatux 0.30.2 (must manually extract and use Rescatux.iso from the ISO). Correct OpenSuse links.

03/18/14 Version 2.0.0.2: Update to support newer version of Offline Windows Password & Registry Editor, LuninuX OS, Pear Linux, and Konboot 2.3 Pro.

02/20/14 Version 2.0.0.1: Fixed Linux Mint 16 Live Installer Crash!

01/30/14 Version 2.0.0.0: Added support for JustBrowsing, Mythbuntu, Bugtraq II, and older pmagic_2013_05_01.iso.

01/10/14 Version 1.9.9.9B: Added support for Fedora 20, LXLE Desktop. Fixed source compilation bug.

12/11/13 Version 1.9.9.9: Delete redundant Ophcrack folders. Re-enabled Dr.Web, Trinity, and RIP Linux. Support Elementary 32 bit.

12/09/13 Version 1.9.9.8B: Added Acronis True Image, Sparky Linux, and SolydX

12/06/13 Version 1.9.9.8: Add option for Paid version of Kon-Boot. Added Manjaro Linux.

12/04/13 Version 1.9.9.7B: Correct ISO Name for Desinfect. Correct OpenSUSE ISO copy failed when using Windows XP. Add support for Rescatux ISO (can't use sg2d version).

11/24/13 Version 1.9.9.7: Modify chain.c32 to address Insane Primary (MBR) partition error. Correct Kaspersky Rescue Disk (Antivirus Scanner) syslinux directory copying issue on Win XP.

11/22/13 Version 1.9.9.6B: Added OpenSUSE. Corrected Desinfec't misspelling.

11/20/13 Version 1.9.9.6: Add Desinfec't 2013 (German Antivirus). Fix broken older Parted Magic menu entries.

11/13/13 Version 1.9.9.5B: Add WifiSlax. Thanks to Geminis Demon for helping finish the entry!

11/12/13 Version 1.9.9.5: Added provision to ensure menu.32 exists. Fixed Falcon4 and Hiren menu creation.

11/11/13 Version 1.9.9.4: Added Persistent Option for Ubuntu and some Derivatives. Fix Kon-Boot free entry. Switch to AutoDetect Size of ISO.

11/08/13 Version 1.9.9.3: Add Liberte Linux. Fixed a menu scrolling bug (vesamenu.c32 incompatible with boot.msg?) that occurred with distros like Puppy and KNOPPIX

11/07/13 Version 1.9.9.2: Add support for TAILS, and Ultimate Boot CD.

11/05/13 Version 1.9.9.1: Quick fix to support older versions of Knoppix.

11/04/13 Version 1.9.9.0: Beta release of YUMI version 2.

How to Create a MultiBoot USB Flash Drive (Windows)

1. Run*YUMI-2.0.6.8.exe following the onscreen instructions
2. Run the tool again to Add More ISOs/Distributions to your Drive
3. Restart your PC setting it to boot from the USB device
4. Select a distribution to Boot from the Menu and enjoy!

That's all there is to it. You should now be booting your favorite distributions from your custom Multi-Boot USB device!

Creating a YUMI MultiBoot USB Flash Drive (Linux)

The following instructions were performed from an Ubuntu 16.04 host environment.

NOTE: YUMI persistence option is currently broken when using YUMI-2.0.6.8.exe within WINE. Don't choose persistence and set the slider or the process will freeze while trying to build the persistent file and you will be forced to close YUMI.

I. Format your USB Flash Drive to use a Single Partition:

1. Open a terminal and type sudo su
2. Type fdisk -l (and note which device is your USB Drive)
3. Type fdisk /dev/sdx (replacing x with your actual usb device)
4. Type d (to delete the existing partition)
5. Type n (to create a new partition)
6. Type p (for primary partition)
7. Type 1 (to create the first partition)
8. Press Enter (to use the first cylinder)
9. Press Enter again (to use the default value as the last cylinder)
10. Type a (for active)
11. Type 1 (to mark the first partition active 'bootable')
12. Type t (for partition type)
13. Type c (to use fat32 partition)
14. Type w (to write the changes and close fdisk)

II. Create a Fat32 Filesystem on the USB Flash Drive:

1. Type umount /dev/sdx1 (to unmount the mounted partition)
2. Type mkfs.vfat -F 32 -n MULTIBOOT /dev/sdx1 (to format the partition as fat32)
3. Remove and reinsert your USB flash drive, or remount it

III. Install WINE:

1. To install WINE from within an Ubuntu operating environment, open a terminal and type sudo apt install wine and press enter. Once WINE is installed, launch YUMI as you normally would by simply clicking the YUMI-2.0.6.8.exe

How YUMI Works: YUMI (Your Universal Multiboot Installer) enables each user to create their own custom Multiboot UFD containing only the distributions they want, in the order by which they are installed. A new distribution can be added to the UFD each time the tool is run.

If you run YUMI from the same location you store ISO files, they should be auto-detected (*See Known Issues Below), eliminating the need to browse for each ISO.

Other Notes: If MultibootISOs was previously used, you must reformat the drive and start over. YUMI uses Syslinux directly, and chainloads to grub only if necessary, so it is not compatible with the older Multiboot ISO tool. Although I do plan to add back most of the capabilities of MultibootISOs as time permits.

Not all Unlisted ISO's can be booted (thus adding Unlisted ISOs is an UNSUPPORTED option).

YUMI can Create a Bootable UFD of the following distros/tools

— Debian Live 32/64 Bit —

• Debian Live

— Fedora 32/64 Bit —

• Fedora

— Linux Mint 32/64 Bit —

• Linux Mint

— OpenSUSE 32/64 Bit —

• OpenSUSE 32bit
• OpenSUSE 64bit

— Puppy Linux 32/64 Bit —

• DPup Exprimo
• Fatdog64
• Lucid Puppy Linux
• Precise Puppy Linux
• Racy Puppy Linux
• Slacko Puppy
• Wary Puppy Linux

— Ubuntu 32/64 Bit —

• Ubuntu
• Ubuntu Gnome
• Ubuntu Server Installer
• Ubuntu Secure Remix
• Ubuntu Studio
• Edubuntu
• Kubuntu
• Lubuntu
• Xubuntu
• Backbox

— Other Distros Alphabetical —

• Android-x86
• Antergos
• AntiX
• Archlinux
• Bodhi
• Bunsenlabs/Crunchbang
• CAELinux (Computer Aided Engineering)
• CentOS Live
• ChaletOS
• Damn Small Linux (DSL)
• Fuduntu
• gpxe (Net Bootable Distros)
• KNOPPIX
• KXStudio
• Mandriva
• Netrunner
• OSGeo Live
• PCLinuxOS
• Peppermint
• Peach OSI Linux
• Pear Linux
• Pinguy OS
• Porteus
• PureOS
• SalineOS
• Scientific Linux CERN
• Semplice Linux
• SLAX (Tiny Slackware Based Distro)
• Slitaz (Another Tiny Distro)
• Sparky Linux
• SolydX
• Sugar on a Stick
• System Rescue CD
• Tails (Anonymous Browsing)
• Liberte (Anonymous Browsing)
• Terralinux
• TinyCore (A Tiny Linux Distribution)
• Ultimate Edition 3
• XBMCbuntu
• Zorin OS Core

———— NetBook Distributions ————

• EasyPeasy (NetBook Distro)
• Jolicloud (NetBook Distro)
• Ubuntu Netbook Remix
• xPUD (Netbook Distro)

————— Antivirus Tools —————

• Acronis Antimalware CD
• AOSS (Malware Scanner) systemstage1
• AVG Rescue CD (Antivirus Scanner)
• AVIRA AntiVir Rescue CD (Virus Scanner) ; does install to root of drive
• BROKEN! Bitdefender Rescue Disk (Antivirus Scanner)
• Comodo Rescue Disk (Antivirus Scanner)
• Dr.Web Live CD ; does install to root
• F-Secure Rescue CD
• GDATA Rescue CD
• Kaspersky Rescue Disk (Antivirus Scanner)
• Panda SafeCD
• Windows Defender Offline

—————– System Tools —————-

• Acronis True Image
• BackBox (Penetration Testing)
• BackTrack5 (Penetration Testing)
• Boot Repair Disk
• Clonezilla (Backup + Clone Tool)
• DBAN (Hard Drive Nuker)
• Deft (Forensics)
• DRBL (Diskless Remote Boot in Linux)
• EASEUS Disk Copy (Disk Cloning Tool)
• FreeDOS (Balder img)
• GParted (Partition Tools)
• GRML (system rescue)
• HDT (Hardware Detection Tool)
• Kali (Penetration Testing)
• Memtest86+ (Memory Testing Tool)
• Matriux (Penetration Testing)
• Offline NT Password & Registry Editor
• Ophcrack (no tables)
• Ophcrack XP (Password Finder)
• Ophcrack Vista/7 (Password Finder)
• Parted Magic (Partition Tools)
• PING (Partimg Is Not Ghost)
• Partition Wizard (Partition Tools)
• Rescatux
• Redo Backup And Recovery (Recovery Tools)
• Rip Linux (Recovery Distro)
• Trinity Rescue Kit ; does install to root of drive
• Ultimate Boot CD (Diagnostics Tools)
• Web Converger (Web Kiosk)
• WifiSLax

• —————– Other OS/Tools —————-

• Linux Live Tools for OCZ
• Hiren's Boot CD ; does install to root of drive
• Falcon 4 Boot CD ; does install to root of drive
• Kon-Boot Floppy Image
• Windows Vista/7/8/10 Installer
• Windows XP Installer

—————– Bootable ISOs —————-

• Try an Unlisted ISO (SYSLINUX)
• Try an Unlisted ISO (GRUB)
• Try an Unlisted ISO (GRUB Run from RAM)

YUMI Troubleshooting, Known Issues, Bugs:

The Persistence feature is currently broken with Newer Debian based distributions due to significant changes upstream. Debian now requires the persistent block file and label to be named persistence instead of live-rw, and it must hold a persistence.conf file containing / Union. I am hoping to make the necessary changes and provide a fix soon.

If you encounter a message stating

An error (1) occurred while executing syslinux. Your USB drive won't be bootable.

Make sure your USB drive is using a Fat32 or NTFS partition with an MBR (Master Boot Record). An exFAT formatted Partition will not work. GPT (GUID Partition Table) Fat32 or NTFS Partitions are also not supported.

If you encounter a message stating

Multiboot software, free download

Insane primary (MBR) partition. Can’t find myself on the drive I booted from

First, replace your chain.c32 file located at multiboot/chain.c32 with (you'll need to unzip the file) -> This zipped chain.c32 File

If replacing the chain.c32 file does not fix the problem, your USB drive may be improperly formatted, contains more than one partition or MBR, or your BIOS is not properly detecting the USB drive as USB-HDD, and/or its firmware needs to be updated. You can try these methods to Format and Restore your USB Drive

Windows to Go/Installers – Options Explained

The Windows to Go option creates a VHD file that is 20GB in size. As such, it requires the drive to be formatted NTFS. Fat32 cannot support a file more than 4GB in size. Many flash drives you might find at local department stores won't be fast enough. You'll need a Very Fast Flash Drive. When Windows boots from the USB for the first time, it'll go through the setup process and then reboot. You'll need to boot using your Windows to Go menu option a second time to finalize the setup process and finally boot into your full Portable Windows.

The Single Windows Installer/PE options are most likely to work for both stock and modified ISO files. When using it, you are limited to storing one Windows Installer per USB drive (I.E. one Win XP and one Win Vista 7 or 10). The Multiple Windows Installer/PE options allow for storing more than one stock Windows Installer per drive. Generally, only unmodified Windows ISO files will work with this option.

-wimboot option stores the extracted Multi Windows Installers in their own directory. -bootmgr option moves the bootmgr and bcd files to root of drive. (note: -bootmgr option does require a Windows Vista or later host to run bcdedit).

Traditional YUMI is not natively UEFI capable. However, it is possible to boot and run your Windows Installers from UEFI. To switch between added Windows versions, navigate to the multiboot/win-directory (replacing win-directory with the Windows version you want to boot) on your USB. Once there, move the bootmgr, bootmgr.efi, and entire boot folder to the root of your USB drive. Then reboot, booting your computer from the UEFI compatible USB. If all went well, it should boot straight into your chosen Windows Installer.

Try an Unlisted ISO – Options Explained

1. Try Unlisted ISO (Grub Partition 4) – This boot option attempts to boot the ISO file using Grub. Additionally it adds a 4th partition table to the USB device and uses this as a placeholder for the ISO. This option has been shown to successfully boot almost all Linux based distributions.
2. Try Unlisted ISO (Grub) – Same as boot option 1, but attempts to boot the ISO without using a 4th partition as a placeholder for the ISO.
3. Try Unlisted ISO (Grub From RAM) – Same as boot option 2, but attempts to store the ISO in system memory and boot it from there. Useful for cases where the ISO is small, and you'd like to boot the OS and then move the USB to different machines and subsequently boot the OS from them as well.
4. Try Unlisted ISO (via Syslinux) – The original default YUMI supported boot option. Syslinux works to boot many distributions, but not all.

Multiboot folder and volume name.

YUMI tries to store most added distributions within the multiboot folder. This is also the root directory set for syslinux. In some cases, YUMI also expects the Volume Label of your USB drive to be MULTIBOOT in order for OpenSUSE, CentOS and several other distributions to boot. YUMI attempts to automatically create this Volume Label, however it can sometimes fail. Please ensure that the Volume Label of your USB remains MULTIBOOT if you expect your distributions to boot.

When booting linux distributions such as Ubuntu from some laptops such as the Lenovo Yoga with a touchscreen, the acpi=off boot parameter might be necessary in order to successfully boot.

My PC wont Boot from my Flash Drive, but BIOS supports USB boot!

Some Flash Drives ship formatted (without a partition), and YUMI requires the drive to contain a partition with a MBR (Master Boot Record). To ensure compatibility, you can use YUMI to format your device as NTFS or Fat32.

How to force a rebuild of the Syslinux MBR:

This is useful if your YUMI prepared USB drive is somehow no longer bootable.

For Newest version of YUMI:
From the multiboot folder on your flash drive, delete the hidden file ldlinux.sys and then rename the libcom32.c32 file to _libcom32.c32. Then use YUMI to install any menu item. YUMI will notice that the file is missing and will attempt to reinstall syslinux and repair the master boot record. Once finished, rename _libcom32.c32 back to libcom32.c32.

For Older versions of YUMI:
Delete the hidden ldlinux.sys file from the multiboot folder, and use YUMI to install any menu item. YUMI will notice that this file is missing and will attempt to repair it.

Other Known Issues:

TAILS – If your USB is detected as a 'fixed' hard drive and not a 'removable' disk, (a few Sandisk drives have the removable bit flipped this way), you'll need to remove occurrences of the boot parameter 'live-media=removable' from the Live64.cfg file found at 'multiboottails-amd64-3.3EFIBOOT' or TAILS will fail to find the live filesystem.

Flacon 4, Hiren's Boot CD, Trinity Rescue Kit, Backtrack, Avira Antivir, and Dr.Web Live CD files are stored outside of the multiboot folder. Most other distribution files remain contained within the multiboot folder. I am open to a simple working solution!

YUMI supports Windows XP Install from USB via ISO. In order for the Windows XP installation to succeed, you must perform the following steps;
1.) To begin an install, select (Stage 1)
2.) Upon first reboot, you must select (Stage 2)
3.) Finally, after (Stage 2) is complete – upon the second reboot, select (Stage 3) to boot the drive where you installed Windows XP. If this option fails, simply remove the USB and reboot!

* YUMI does support NTFS, however not all distributions will boot from an NTFS formatted device. NTFS is required for Windows to Go and distributions containing files over 4GB.

Troubleshooting Boot Errors:

While trying to run an ISO from USB, If you get a Boot error saying:

Error 60: File for drive emulation must be in one contiguous disk area

You'll need to defragment your ISO using one of the following tools:

contig – Command line tool to defragment ISO files.

Sardu Multiboot Software Download

wincontig – GUI tool to defragment ISO files.

Additional Notes:
Edit non-booting menu entries for the ISO's you have added via the 'Try and Unlisted ISO (GRUB)' options, by editing the corresponding entry in multibootmenumenu.lst

If you don't have a floppy drive and get fd0 errors while booting, simply add floppy.allowed_drive_mask=0 to the append line for the troubled entry. Although the best fix is to simply disable floppy in BIOS.

Persistently Saving Changes: YUMI currently enables the casper-rw persistence feature for some (but not all) Ubuntu based distributions. Yes, you can have multiple persistent Ubuntu based distributions, as each distro utilizes its own casper-rw file. * Persistence will NOT work on NTFS formatted USB drives. Some Distributions also will not even boot via NTFS!

Ophcrack Tables: To load Ophcrack tables when booted in this fashion, the tables folder needs to exist at the root directory of the USB device; (example F:tablesvista_free). Get Ophcrack Tables from the Official Ophcrack site and unzip to your USB. You can have both XP and Vista/7 tables working together.

YUMI on Linux: You can run YUMI on a Linux Host via WINE. <– currently untested, and possibly broken.

Commercial boot managers are very helpful when you are willing to boot more than a single operating system in a while. When you are trying to boot your system, you can look for various easy to use and helpful software in Google by typing boot manager and multi-boot loaders, graphical boot manager, dual boot system, multiboot os software, osl2000 boot manager, multiboot windows, dual boot windows 7 and windows 8 and multiboot windows.

Multi Boot Manager

This is an advanced multiboot OS software that lets you easily install, boost and manage about 100 independent operating systems within your main system. It has several upgraded features that allows you to have independent versions of Windows as well as copies of the same version of Windows along with the ability to boot them.

zBoot Manager

This boot managers and multi-boot managers can take care of 8 independent operating systems on a single hard disk along with multiple copies of the same operating system. You can hide as well as un-hide the partitions, share them among operating systems and this multiboot manager supports all versions of Windows published till date.

GAG

By downloading this dual boot system, you can get the distribution itself and the software is ready to be used upon completion of the installation. You are also free to select a preferable language so that you can work more efficiently with this graphical boot manager and when you want, you can also use the mirroring facilities.

Grub2Win

This multiboot software comes with virtually an endless number of features so that you can work with it on Mac or PC platforms effortlessly. You can use the graphical or text-mode boot and auto-detection of EFI boot loaders. It also allows to edit the boot-time manually as well as set boot-time from the given list.

Other Platforms

Multiboot Usb

The multiboot manager are the essential components of the modern desktops and laptops. The software developers are constantly striving to offer the best software for unmatched user experience and easy operation and therefore they have created the multi boot software for separate platforms so that they can be used efficiently.

rEFInd for Mac

The best feature of this multiboot manager is that it allows you to check its performance level through a CD-R or a USB flash drive before you decide to install it. It can support EF1x and UEFI 2x computers where you can directly launch the LINUX 3.3 0 and later versions with the aid of EFI stub loader support.

EasyBCD for Windows

This dual boot system allows you to boot anything be it Linux, Windows, Mac or BSD and you can boot via the USB drives, virtual discs, ISO images and more. You can customize the entries and boot your system virtually from anywhere and protect the system against disaster with the aid of powerful recovery utilities.

Plop Boot Manager – Most Popular

This is an awesome multiboot Windows offering loads of unique features that would help you to rescue data both from software and hardware, service and plan networks, webhosting, domainhosting, software development through Linux and a lot more. It works well on Android, Linux and Windows and therefore you can download and use it easily in your device. You can also see Hard Drive Cloning Software

What is Multi Boot Manager?

Multi Boot Managing software allows you to boot multiple operating systems on your device. The term dual booting manager typically implies that software that allows booting two operating systems within a device. These software are loaded into the main memory of the device from the persistent memory like a hard disk drive. You can also see Data Destruction Software

The multiboot manager then loads as well as executes the procedures that complete the booting process. Generally, the process takes about ten seconds and involves procedures like a power-on-self-test, locating peripheral devices and finally searching, loading and starting the operating system. These second stage boot loaders and managers have become an integral part of any modern smart device.

As you can see, these are top 6 multiboot manager that allows you to boot the operating systems in your device and helps in boosting its performance. With the best tools for each separate platform, it becomes easier for you to select and use them in any preferable language and gives you better control over the booting process.